Quantcast
Previously Sold View All Categories Used Machinery Logo

Used Machinery

A small selection of machines that have just arrived at Henderson Food Machinery these are  all used machinery mainly purchased as part exchange against our new machinery which we have to offer within our extensive portfolio.

The machines we are showing have not been into our workshop to be tested and assessed by our engineers to see what work needs carrying out to bring back into full working condition 

The machinery can be sold with warranty or as is 

For further information call Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on  Lazy Susan 1.5 Metre

Lazy Susan 1.5 Metre

Lazy Susan 

1.5 Metre 

Stainless Steel, well built turn table

Normally placed at the end of a production line

Product would be turning on the Lazy Susan ready for the next process of production

Flat top table. No lip

3 phase 

For further information on our Lazy Susan's or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on  Lazy Susan 1.5 Metre

Lazy Susan 1.5 Metre

1.5 METRE LAZY SUSAN

Stainless Steel, well built turn table

Normally placed at the end of a production line

Product would be turning on the Lazy Susan ready for the next process of production

Flat top table. No lip

3 phase 

For further information on our Lazy Susan's or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on 200L Used Tote Bins

200L Used Tote Bins

COMING SOON TO HENDERSON FOOD MACHINERY!

200 Litre Tote Bins Meat Bins

Used in superb condition 

32 In Total

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on 200mm In-line Electric Fryer

200mm In-line Electric Fryer

200mm In-line Electric Fryer 

2100mm High

200mm Wide Belt

720mm Total Width

2200mm Length

2000mm Frying in Oil

Top Hold Down Belt

Inline Machine 

Chimney Exhaust System 

Chain System for lifting Hoods 

3 Phase Machine 

Suitable for use in food processing or manufacturing factory or test kitchen 

Previously Used for frying Breaded Fish Products, however suitable for a variety of other fried products

Breaded Poultry, meat, fish, sausages and other pre breaded or flash fried products 

Our customer upgraded to a new Deighton Electric Fryer

For further information please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 


more on AMB Mixer Grinder

AMB Mixer Grinder

AMB MIXER GRINDER

32 Mixer grinder on heavy duty castors

60 Litre capacity

Small footprint 

Portable

Capable of producing up to 800 kg per hour

Mixing paddle, feeding worm and mincing head are easily removed for cleaning

More pictures and information coming soon

Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on Apple MR 900 Depositor

Apple MR 900 Depositor

Apple MR900 Apple Depositor

Depositing Range 2ml to 1.2 Kilo

2017 Machine only used for demos

Suitable for depositing a variety of products within the meat, fish, poultry, bakery, ready meals, confectionery and vegetable industry, depositing liquids With or without particulates, various depositing speeds and drops.

Very accurate deposits we supply a wide range of depositing heads, products cylinders and holding hoppers.

Simplicity is the main feature of the MR900, allowing unskilled operators to easily strip down the machine for cleaning and product change overs. Deposit volume and speed controls can be adjusted in seconds.

The machine is extremely robust and is designed to withstand the most demanding conditions with the minimum maintenance.

The MR900 series Depositor is pneumatically operated and can be supplied with several different sizes of product cylinders.

The machine shown is fitted with telescopic pipe work as standard allowing the outlet nozzle to be easily positioned exactly where required working with indexing or magic eye conveyors.

MR900

The MR900 series depositor is pneumatically operated and can be supplied with four sizes of product cylinder. This provides an accurate depositing weight range of 20-1250g, up to 60 cycles per minute. The machine is extremely robust and is designed to withstand the most demanding conditions with the minimum maintenance. ‘Lubrication free’ pneumatic components can be fitted as an option.

DECORATING HEADS

Stainless Steel Decorating Heads incorporating plain tubes or star tubes can be manufactured to deposit a unique and individual finish to savoury products, cakes and Gateaux. Food quality Nylon decorating heads can also  be manufactured, creating a wider diversity of unique patterns and even more complex decorating options.

Henderson Food Machinery can supply a wide range of Depositors from Apple

The Dims of this machine are:H1940mm X W700mm X L1400mm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Bobet Boot Washer

Bobet Boot Washer

H1100mm x W930mm x L810mm

more on Butcher Boy Bandsaw

Butcher Boy Bandsaw

Butcher Boy Bandsaw

The Butcher Boy Bandsaw is designed for cutting boned meat

Used in supermarkets, butchers shops and processing plants.

3 phase 

Easily dismantled for cleaning

Emergency stop

Stainless Steel construction

For further information on the Bandsaw or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 


more on Carruthers Advantedge 5000 Slicer

Carruthers Advantedge 5000 Slicer

Carruthers AdvantEdge 5000 slicer 

The Carruthers advent edge 5000 slicer has a high volume two dimensional AdvantEdge dicer/slicer 

provides complete versatility for dicing, slicing and stripping a variety of fresh or cooked meats, 

seafood and other products. It is designed for continuous flow processing, the AE 5000 2D produces

higher quality product, requires less handling and reduced labour costs.

The Carruthers advent edge 5000 slicer has Consistent portions, Large feed opening, 

Maximum yields and handles tough applications.

The Carruthers AdvantEdge 5000 slicer is designed to handle the most delicate / toughest proteins.

The Carruthers AdvantEdge 5000 slicer doesn’t rip or tear the product resulting in minimal fines for the best quality cut.

The AdvantEdge slicer processes product up to 5” in height at any length with out the need for pre cutting.it cuts anything from primal cuts to full size deli logs our AE5000 models can strip, streak, cube, or dice nearly anything fresh or cooked. 

L2390mm x W1200mm x H1900mm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Ciris Optical Sorter Grader

Ciris Optical Sorter Grader

Ciris Optical Sorter/Grader

2006 Machine

The Ciris optical sorting machine is a machine specially developed for sorting products with various optical defects. Singulating, checking and sorting each individual piece.

The Ciris optical sorting machine is designed for potatoes (peeled or unpeeled), apples, onions and any other round products which can be wet, dry or frozen.

The products can be sorted by discolouration, weight, length, diameter and volume.

Due to the double outflow section, the product flow can be separated into three streams

Accepted product

Non-uniformed

The product to be processed

Machine Dimensions: H2200 x W1300 x L3700mm

3 Phase

The Ciris optical sorting machine has an automatic cleaning system complete with a water and dustproof housing.

Use of the Ciris optical sorting machine not only leads to a higher quality of your product, but also to lower and more predictable production costs.

For more information please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com

more on Complete Powder Blending Packing Line

Complete Powder Blending Packing Line

Complete Powder Blending Packing Line 

Just Arrivec

More Details and Pictures Shortly 

For Further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on Complete Weighing Packing Line

Complete Weighing Packing Line

Complete Weighing Packing Line

Lazy Susan

Ishida 14 Head Multi-Head Weigher

PA Vision 400 Tray Sealer with various tooling

Gantry

Infeed Conveyor

Ishida 14 head multi-head weigher is suitable for food and non-food products, typically used for dry products including sacks, cereal, confectionery, biscuits, pasta, pet food and many more applications. It is quick and efficient.

PA Vision 400 Tray Sealer is a stainless steel continuous tray sealing machine. It is set up to seal trays 175 x 130mm. Various tooling is available for this machine.

For further information on our complete weighing packing line or any of our other machinery, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 


more on Crown Indexing Conveyor

Crown Indexing Conveyor

The Crown Indexing Conveyor. 

The Crown indexing conveyor designs combine speed and accuracy to enhance your unique indexing practices. The machine achieves these results through the creation of precise, custom automation for your sorting, counting, and spacing processes.

The conveyor belt breaks production lines into defined steps to achieve a variety of custom drive and control options for both high and low volume manufacturing environments.

Previously used as ready meal line.

Variable speed motor.

There are also attachments for depositors.

The Crown Indexing Conveyor would be ideal for ready meal, Lasagne and Meal replacement produce.

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Crusader Tray Washer

Crusader Tray Washer

Crusader Tray Washer

The Crusader is a single lane continuous wash machine

This machine can accommodate up to 200 trays, crates or boxes per hour

Suitable for low or intermittent throughputs

Chain Driven

Adjustable levelling feet

Emergency Stop at both ends

Stainless steel construction

Recirculated, hot water jet system

Machine Dimensions: H1800 x W1400 x L2500mm

Suitable for trays up to: H350 x W550mm

For further information on the Crusader Tray Washer or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com    

more on De Nester

De Nester

H1720mm x L1200mm x W1200mm

more on Deighton AF25 ASCOLI FLAVASAVA Ham boiler/ cooker

Deighton AF25 ASCOLI FLAVASAVA Ham boiler/ cooker

Deighton AF25 ASCOLI FLAVASAVA Ham boiler/ cooker

Ascoli AF25 ham boiler is part of the Flavasava range of water cookers.

Capable of holding up to 4 hams at one time the AF25 ham boiler has a capacity of 60 litres.

This table top model water cooker is ideal for the butchers who require a ham boiler but are limited for space.

Dimensions:

Outer: H530 x W520 x L520mm Including Lid

Inner: H300 x W445 x L435mm Including element guard 

By cooking the Hams at a lower temperature, over a longer period of time can help reduce shrinkage by up to a third, also if you cook in a "shrink-on" bag you will reduce weight loss and extend the life of the heating element.

The Deighton Ascoli Ham Boiler comes with a 24 Hour plug-in timer. This allows you to cook through the night using less electricity

The Ascoli boiler can cook a variety of meat products all at the same time by using cooking bags, which keep the products separate allowing you to use the machine for a greater product range.

For further information on our range of Ascoli Flavasava Ham Boilers or any of our other cooking equipment, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 


more on Deighton Pre-Duster 200mm

Deighton Pre-Duster 200mm

DEIGHTON PRE-DUSTER 200MM

Deighton pre-duster is designed to apply a thin layer of dust or flour to the product. 

By submerging the product in a bed of dust via a conveyor, a full and even coat is applied to the underside.

The product then moves through a dust curtain and they are showered accurately with dust to cover the remaining areas.

When this process is complete the product moves on through, travelling underneath a variable pressure air knife.

The variable pressure air knife removes all excess dust leaving the product ready for the next stage of processing or packaging.

To help prevent wastage, the excess dust is recycled back into the tank and trans-flow conveyor.

Deighton Pre-Duster can be installed as a stand alone unit or as part of a line.

Variable speed conveyor

3 phase machine

200mm

Machine dimensions: H1450 x W900 x L1600mm

Height Adjustable wheels. Approximately 50mm

For further information on the Deighton Pre-Duster or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on DWS Twin Belt Cheese Depositor

DWS Twin Belt Cheese Depositor

H1800mm x W960mm x L1760mm

H1850mm x L2000mm x W1230mm

more on Echo Premade Pouch Filling Machine

Echo Premade Pouch Filling Machine

Echo Premade Pouch Filling Machine

Model: MR8 - 200C 

This machine was previously used for packing confectionery into premade pouches

Capable of packing 1000 - 2700 bags per hour

Bag size: W100 - 200mm x L150 - 300mm

Material: All laminated film bags

Fully automatic 8 station intermittent rotary pouch filler for preformed bags

Opening and closing machine

Safety guard protected for high speed and consistent production

Heavy duty components and parts are selected for machine durability

Hygienic construction with easy cleaning

Operator friendly design, touch screen control system

Versatile design, easy to link up with Multi-Head Weigher

Suitable to use as powder or liquid filler into premade pouches

Machine Dimensions: H1455 x W1450 x L1645

Electric Power:

Main machine power: 0.75kw

Machine output power: 0.95kw

Vacuum pump power: 1.1kw

Bag feeding motor 1: 25w

Bag feeding motor 2: 25w

Bag feeding motor 3: 25w

Heating pipe: L type 10 x 230L    300w x 220v    4 pipes

Intermittent Mechanism: BYH-100-6-120

Vacuum Pump: KPX6-P-V-03

Overload protection

Air pressure pump specs:

Exhaust pressure: 0.8mPa     Air Displacement≥0.6m?/min

Power supply:

Driver power AC320V      Controlled power DC24V

THIS MACHINE DOES NOT COME WITH A MULTI-HEAD WEIGHER

For further information on the Echo Premade Pouch Filling Machine or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on FAI Pack FR20 FT Shrink Tunnel

FAI Pack FR20 FT Shrink Tunnel

FAI Pack FR20 FT Shrink Tunnel

450mm wide x 900 length 

Ideal for shrink wrapping a variety of products, meat, fish, poultry, vegetables and within many other industries 

Electric Shrink Tunnel

After wrapping the product in barrier film, it is then fed into the machine the heat from above and below in the machine helps the narrowing of the film to tightly wrap around the product, giving a superb finished appearance.

Contact Henderson Food Machinery for further information

02890 994 202 or sales@hendersonfoodmachinery.com

 

 

 


more on Fendo OY F-19  S Slicer

Fendo OY F-19 S Slicer

Fendo OY F-19 S Slicer 

Table Top Unit 

Presently set up to slice a variety of products

Economical, high speed, rotary blade slicers that are well suited for cutting product into strips

Ideal for jerky, fajitas, stir fry, liver, poultry,vegetables and other products

Constructed of stainless steel

Stainless steel container to catch and transport the product

Can also produce 2 dimensional slicing in single operation

High volume output in compact design

Quick blade set changeover increases production flexibility, no tools required

Full safety system with upper & lower limit switch & Emergency stop switch

Easy to clean

Blade size: 200mm diameter x 1.2mm thick

Machine Dimensions: H710 x W500 x L770mm 

Weight: 85kg

Rotational Speed: 1000 per minute

3 Phase

For further information on the Fendo Slicer or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on Francis Overall Carrot Baton Machine and Slither Remover

Francis Overall Carrot Baton Machine and Slither Remover

Francis Overall Carrot Baton Machine

A semi automatic Baton Machine in all Stainless steel. This machine is suitable for elongated products such as carrots, cucumbers and parsnips.

A carousel feed system presents the product to the Baton grid, where pre Cutting blades automatically cut the product to length as well as removing the top and Bottom (tail) of the product, giving a clean cut and uniform finish.

The machine is capable of 3,600 cycles an hour.

Jaycraft Slither Remover

The Slither Remover machines are a good solution to remove waste slithers from Baton, diced, sliced and chipping processes, removing imperfections and producing a clean finish

The rollers are adjustable, even during processing. All of the rollers on the Slither Remover have the same rotation direction and are provided with a swing ring, creating good movement and a nice overall spreading of the products , very important when achieving the best sorting result.

The product is then transported over the rollers to the output, a process done very carefully, ensuring no damage is done to the product.

Water is collected underneath the Slither Remover and can be removed from there

The Slither Remover also comes with a spraying pipe, to spray over the rollers removing any sticky parts

For further information please contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Freemantle S05 Continuous 2 Flap Box Sealer

Freemantle S05 Continuous 2 Flap Box Sealer

Freemantle Continuous 2 Flap Box Sealer

Model: S05

YOM: August 2014

The Freemantle Box Sealer is a manually filled machine that glues the ends of the boxes and seals them

This machine is suitable for a wide range of box sizes

It is very easily adjustable to suit different sizes, to change the size it is approx. 30 seconds

It is a safe and easy to use machine which operates on demand

Variable speed, can seal up to 50-60 boxer per minute

The Freemantle continuous sealer is fitted with the Nordson Glue Applicator which is very economical and thoroughly efficient 

For further information on the Freemantle Continuous 2 Flap Box Sealer or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com  

more on Freemantle Semi Automatic Pre-Glued Sleever

Freemantle Semi Automatic Pre-Glued Sleever

Freemantle Semi Automatic Pre-Glued Sleever 

Model S11 YOM 2002 

The machine sleeve magazine is loaded with flat preglued sleeves. 

The machine cycles continuously and on demand selects and erects the flat sleeves. 

The erected sleeves are then passed by the operator loading area where the product is pushed from the infeed conveyor across and into the open sleeve by the operator. 

The finished product is then ejected from the end of the machine wide edge leading.

For further information contact Henderson Food Machinery on 02890 994 202 or sales@hendersonfoodmachinery.com 

 


more on FRL600 Bag Sealer with Conveyor

FRL600 Bag Sealer with Conveyor

Bag Sealer with Conveyor 

Hot Air Bag Sealer 

Rise and Fall Conveyor 

Model FRL600 

Ideal for sealing a variety of bagged products can be used within meat, fish, poultry, sauces, petfood, cereals, bakery, and many other industries

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Geba Vacuum Packer Floor Standing

Geba Vacuum Packer Floor Standing

Geba Vacuum Packer Floor Standing 

Ideal machine for vacuum packing meat, fish, vegetables and other food applications

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on GEI Turbo Stirrup Transfer Pump

GEI Turbo Stirrup Transfer Pump

GEI Turbo Stirrup Transfer Pump

Stainless Steel construction

Suitable machine for pumping product from a Tote Bin or Vessel into another Depositor

Pneumatic lifting system, please see video of lifting system working

For further information on the GEI Turbo Stirrup Transfer Pump or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on Goldpeg Rotatherm Twin 1000 Litre Mixer

Goldpeg Rotatherm Twin 1000 Litre Mixer

Goldpeg Rotatherm Twin 1000 litre Mixer 

Twin Shaft Paddle Mixing

Facility to set up with direct steam injection 

1000 litre Mixing Set Up

Strength, control, consistency and flexibility are key features of GoldPeg's Twin Shaft Ribbon Blender. 

A blender is generally required for medium to high viscous products. 

Ideal for mixing a variety of products from processed cheese, natural mozzarella, baby food, sauces - smooth & particles, dips, fruit and vegetable, purees, pet food, MDM rendering & more.

This blender will give you the following benefits:

State-of-the-art operational control

Stainless steel construction

Length 5200mm x Width 2200mm x Height 2400mm

Please call email for further information Henderson Food Machinery 02890 994 202 or sales@hendersonfoodmachinery.com

 


more on Grasselli NSL 600 Slicer

Grasselli NSL 600 Slicer

Grasselli NSL 600 Slicer

The Grasselli NSL 600 slicer is a Vertical meat slicer for obtaining perfectly even slices of bone-in or boneless meat. The Grasselli NSL 600 Slicer has Extreme precision even for thinner slices, and high yields: a technologically advanced solution for processing fresh meat.

The Benefits of the Grasselli NSL 600 Slicer are that the Optional quick blade changing system, for replacing the entire set of blades in just a few minutes. There are no tools needed to prepare for the cleaning process, sanitation and blade replacement. There are Adjustable cutting parameters to allow the maximum quantity of product to be sliced. There is a Possibility to slice bone-in meats without chipping and a Possibility to cut also crust frozen meats with a temperature of -4/-5 degrees.

The Grasselli NSL 600 Slicer is Extremely versatile with a wide range of cutting options, with its Cutting-edge design with continuous welding and rounded edges to ensure greater hygiene. There are Special solutions available on request (such as cutting chambers with differentiated cutting thicknesses).

There is a Cutting capacity up to 2,000 kg/h depending on the product conditions. There is the Possibility to cut both boneless meats (minimum thickness 2.5 mm) and bone-in meats. It has a Sectioned meat pressing system for cutting bone-in products on the BI version. The NSF certified outfeed conveyor belt. The Automated blade tension adjustment system, With Built-in automatic lubrication system and Frame in food-grade non-radioactive Stainless steel.

H1460mm X L1200mm X W1530mm

For furrther information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Grasselli SL 600

Grasselli SL 600

Grasselli SL 600 

600mm chamber

The Grasselli SL 600 is ideal for slicing various meat, poultry, Fruit and vegetable products.

Slicing machine that cuts uniform parallel slices with the Grasselli multiblade cutting system. 

Chamber system with automatic outfeed conveyor.

The dims of the Grasselli are: H1830mm X W1200mm X  L1300mm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

 

more on Grote SA530 Pendulum Slicer

Grote SA530 Pendulum Slicer

Grote SA530 Pendulum Slicer

Grote pendulum slicer/applicator can stack, shingle and count a variety of boneless products; fresh or cooked meat, fish, cheese, poultry ,fruit, vegetables and bread. Slicer can also be triggered to slice one or more times as a tray or crust is positioned under the cutting zone, ideal for entree' assembly. Slicer is cantilevered to set over an existing 30" wide product conveyor.

The Grote slicers overall cutting zone is 5" x 30", the product chute system is divided in two to allow two lanes of independent product slicing. Grote pendulum slicer applicators are capable of slicing speeds up to 120 cycles per minute. This slicer is often used to slice pepperoni or similar product in a specific pattern onto pizzas,trays,sandwiches as they advance along the conveyor.

Pictures Taken Before Cleaned.

Contact Henderson Food Machinery for further information on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on H&C Inline Top and Bottom Gas Oven

H&C Inline Top and Bottom Gas Oven

Inline Top and Bottom Gas Oven

BM 24-2500-G

Machine no 0761-01

415 volt, 3 phase, 50 HZ, 610KG

600mm wide  Wire Conveyor

Length of conveyor and machine 3000mm

Height of oven approximately 1900mm depending on flume

Combustion fan

Variable speed controlled wire belt conveyor

Twin Burners with Floating rings

Stainless steel stand alone machine, ideal for cooking or grilling meat,  fish,  poultry, ready meals and other products .

For further information on our cooking equipment or any of our other machinery, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 


more on Handtmann VF300 Vacuum Filler with AL Linker and Sausage Hanging Line

Handtmann VF300 Vacuum Filler with AL Linker and Sausage Hanging Line

Handtmann VF300 Vacuum Filler with AL Linker and Hanging Line 

VF300B Vacuum Filler with PLC Control

AL Linking System

Sauasage Hanging Line

Line from 2004

Refurbished Line

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Handtmann VF300B Filler with Tote Bin Loader

Handtmann VF300B Filler with Tote Bin Loader

Handtmann VF300B vacuum filler with Tote Bin Loader

Machine just finished in production and in good working order arriving next week.

Tote Bin Lifter for 200 litre tote bins. 

General specifications

Filling capacity:  10,000 kilograms per hour

Filling pressure:  up to 35 bar

Up to 500 portions per minute depending on portion size

Portioning range:  5 to 10,000 grams

Hopper capacity:  350 litre

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Heller 1500L Through Door Vacuum Tumbler

Heller 1500L Through Door Vacuum Tumbler

Heller 1500L Through Door Vacuum Tumbler

3 Phase Machine

A very large capacity for large scale jobs, flows in a horizontal rotation.

Stainless Steel

Control pannel with the option to set selected interval/stoppage times. 

Vacuum Pump

Front load/rear discharge

Ideal for a variety of applications, massaging of cooked cured products , salt impregnation braising and in depth salting of dry cured products, dry salting, seasoning, marinating, game and goulash, mixing of salads , dressing and sauces , seasoning and processing of fish and seafood products. The tumbling motion flips marinade continuously onto food, massaging it into the meat to produce moist , flavourful product every time.

For further information Contact Henderson food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Heller Vacuum Tumbler 800L

Heller Vacuum Tumbler 800L

Heller Vacuum Tumbler 800L 

3 Phase Machine

Stainless Steel 

Vacuum Pump

Control panel with the option to set selected interval/ stoppage times for increased productivity.

Ideal for a variety of applications, massaging of cooked cured products , salt impregnation braising and in depth salting of dry cured products, dry salting, seasoning, marinating, game and goulash, mixing of salads , dressing and sauces , seasoning and processing of fish and seafood products. The tumbling motion flips marinade continuously onto food, massaging it into the meat to produce moist , flavourful product every time.

Henderson Food Machinery can supply a range of vacuum tumblers for further information contact us on 02890 944 202 or email sales@HendersonFoodMachinery.com


more on Henkelman 600 Swing Lid Vacuum Packer

Henkelman 600 Swing Lid Vacuum Packer

Henkelman 600 Swing Lid Vacuum Packer  

4 x 600mm Sealing Bars

500 distance gap between bars

2004 Machine

Completely Refurbished

Ideal for a vacuum packing a variety of products

For further information contact Henderson Food Machinery 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Hoegger Alpina 330 Litre Bowl Cutter

Hoegger Alpina 330 Litre Bowl Cutter

COMING SOON TO HENDERSON FOOD MACHINERY!

Hoegger alpine 330 litre bowl cutter

The Alpine 330 is a stainless-steel machine and is a Litre is a feature filled Bowl Cutter, ideal for producing consistent and homogeneous texture in products processed products and emulsions. This dynamic machine consists of pneumatic controls and a 1400 mm bowl diameter contributing to its exceptional results. This machine is currently being rebuilt with new rams, pneumatics, electrics and controls.

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Ilapak Delta 2000 LDR Flow wrapper

Ilapak Delta 2000 LDR Flow wrapper

Ilapak Delta 2000 LDR Flow Wrapper 

Gas Facility

Previously used for wrapping meat products however suitable for a variety of products within fish, poultry, vegetables and other applications

Long dwell sealing head to optimise sealing cycle.

3 AC motors to control infeed, rollers, jaws (additional motors with automatic feeders)

User friendly 6" colour VGA touch screen operator interface with intuitive icons

64 programs (additional memory on request)

Automatic product size changes

Integrated temperature controls

Electronic diagnostics on-board

No product / No bag

Misplaced product detection system

Ports for peripheral units (printer, labellers, gas control, etc.)

Programming via AT compatible keyboard

Robust, hygienic, easy to clean design

Adjustable folding box

Automatic sealing rollers height adjustment

For further information on the Ilapak Delta 2000 LDR Flow Wrapper or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Ilpra Foodpack Basic VG Tray Sealer

Ilpra Foodpack Basic VG Tray Sealer

ILPRA FOODPACK BASIC VG TRAY SEALER

The Ilpra Foodpack Basic VG tray sealer is an inline machine whose structural principles meet the hygienic and safety requirements of the standards in force

Thanks to the materials used for it's manufacturing, the Ilpra Foodpack Basic VG machine is suitable for working in wet and or aggressive environments

All the electric connections have got IP 65 class protection

This machine is a vacuum and gas system with Busch pump

Machine Dimensions: H1600 x W1350 x L3400mm

Loading area approximately: L1800 x W310mm 

 


more on Ilpra FP Rotobasic Table Top Tray Sealer

Ilpra FP Rotobasic Table Top Tray Sealer

Ilpra FP Rotobasic Table Top Tray Sealer

The Ilpra Rotobasic is a table top Tray Sealer with the same features as the Basic model.

Ilpra Rotobasic is equipped with a 2 station manual rotary table. While one side is being loaded or unloaded, the other side will be sealed and cut. Therefore speeding up production.

Easy to use touch screen panel

Various tooling shown in pictures along with approximate measurements

Die set 1 approximate outer dimensions: 120 x 214mm

Die set 1 approximate inner dimensions: 105 x 199mm

Die set 2 approximate outer dimensions: 135 x 174mm

Die set 2 approximate inner dimensions: 120 x 160mm & 80mm to middle bar.

For further information on the Ilpra Rotobasic Table Top Tray Sealer or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on Incline Screw Feed Auger

Incline Screw Feed Auger

Incline Screw Feed Auger 

Electric 

Portable 

Stainless steel 

Hopper measurements: W850mm X L1600mm X H830mm

Internal width of discharge:260mm 

Discharge DIMS: W430mm X H360mm X L2710mm

Total machine DIMS: H2660mm X W1400mm X L2700mm 

For further information call Henderson food machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com  

more on Industrial Grinder

Industrial Grinder

INDUSTRIAL GRINDER WITH 200MM HEAD

Suitable for grinding fresh and frozen products.

More pictures and information coming soon

Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Inotec W99 Sausage Cutter

Inotec W99 Sausage Cutter

Inotec W99 Sausage Cutter

Conveying speed up to 2,1 m/s can produce up to 1.800 Cuts per Minute

The Inotec W99 Sausage Cutter is very user friendly and easy on maintenance

The W99 is a continuous industrial heavy duty operation Sausage Cutter

Hygienic and ergonomic design, high performance processors, Twist Extender and Twist Recognition

Programmable product and process data

Cutting capacity up to 1800 cuts per minute

Conveying speed adjustable and programmable: 0,1 – 2,10 [m/s]

Minimum length of the twist 2 [mm]

Range of Adjustment: 8 – 48 [mm]

Adjustable infeed and outlet heights

Constant cutting results, programmable product and machine parameters, and automatic range of adjustment, cutting of double clipped and tied products, counting and portioning function

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@henderonfoodmachinery.com

 


more on Ishida CCW-NZ-106B-S/15-WP Fresh Food Weigher

Ishida CCW-NZ-106B-S/15-WP Fresh Food Weigher

Ishida CCW-NZ-106B-S/15-WP Fresh Food Weigher (FFW) 

2 in stock 2009/2008

2009 Machine now sold one left 

Ideal solution for the weighing of a variety of products within meat, poultry, shellfish, vegetables and other applications

The FFW is ideal for delivering excellent accuracy, faster throughput and ensuring perfect product consistency.

Ishida’s Fresh Food Weigher is to combine the proven accuracy of the multihead weighing principle with a linear design that allows manual feeding of the product onto the belt feeders of the weigher.

Instead of product being distributed to the weigh hoppers via vibratory feeders, an operator directs the mix along a set of linear belt feeders. The operator should ensure that all six belt feeders receive a fair share of product.  

The Fresh Food Weigher is specifically designed to handle sticky fresh products such as fish, vegetables, also meat, poultry or fresh pasta. 

It features specially developed stainless steel or plastic hoppers with anti-stick scraper gates to ensure a smooth, reliable and consistent product flow through the weigher.

Waterproof construction allows easy cleaning of all contact surfaces.

Using Ishida’s proven multihead weighing technology, the computer selects the combination of hoppers that most closely matches the target weight.

A set of booster hoppers under the weigh hoppers holds product not initially selected by the computer. This frees up the weigh hoppers to accept more product and thus generate additional weight combinations, which further increases speed and accuracy.  

The FFW can be positioned above a tray sealer or thermoformer machine 

Ishida FFW only requires one operator.

Pictures taken before cleaning more to follow 

For further information contact Henderson Food Machinery 

02890 994 202 or sales@hendersonfoodmachinery.com 

 

more on Ishida CCW-NZ-106B-S/15-WP Fresh Food Weigher (FFW)

Ishida CCW-NZ-106B-S/15-WP Fresh Food Weigher (FFW)

Ishida CCW-NZ-106B-S/15-WP Fresh Food Weigher (FFW) 

2 in stock 2009/2008

Ideal solution for the weighing of a variety of products within meat, poultry, shellfish, vegetables and other applications

The FFW is ideal for delivering excellent accuracy, faster throughput and ensuring perfect product consistency.

Ishida’s Fresh Food Weigher is to combine the proven accuracy of the multihead weighing principle with a linear design that allows manual feeding of the product onto the belt feeders of the weigher.

Instead of product being distributed to the weigh hoppers via vibratory feeders, an operator directs the mix along a set of linear belt feeders. The operator should ensure that all six belt feeders receive a fair share of product.  

The Fresh Food Weigher is specifically designed to handle sticky fresh products such as fish, vegetables, also meat, poultry or fresh pasta. 

It features specially developed stainless steel or plastic hoppers with anti-stick scraper gates to ensure a smooth, reliable and consistent product flow through the weigher.

Waterproof construction allows easy cleaning of all contact surfaces.

Using Ishida’s proven multihead weighing technology, the computer selects the combination of hoppers that most closely matches the target weight.

A set of booster hoppers under the weigh hoppers holds product not initially selected by the computer. This frees up the weigh hoppers to accept more product and thus generate additional weight combinations, which further increases speed and accuracy.  

The FFW can be positioned above a tray sealer or thermoformer machine 

Ishida FFW only requires one operator.

Pictures taken before cleaning more to follow 

For further information contact Henderson Food Machinery 

02890 994 202 or sales@hendersonfoodmachinery.com 

 

more on IWM T200 Tray Washer

IWM T200 Tray Washer

IWM T200 Tray Washer

Stainless Steel construction 

Variable speed

Single lane continuous wash

Up to 200 crates or trays per hour

Maximum size 600 x 400mm

4mm thick PVC/silicone curtains

Fresh water rinse

For further information on our IWM T200 Tray Washer, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on JBT Double D Steam Rack Oven

JBT Double D Steam Rack Oven

JBT Double D Steam Rack Oven x 2 

JBT DD cookers can be sold separately as all control systems for each are in separate panels. 

They are steam with optional electric booster elements fitted. 

Through Door Ovens 

Supplied with Cooking Racks  

The Double D Steam Cooker is designed to produce the best possible results across a wide range of steam cooked products, including chicken and poultry products, hams, fish and seafood, rice, vegetables, savoury puddings and Christmas puddings.

More details and pictures to follow

Contact Henderson Food Machinery for further information 

02890 994 202 or sales@hendersonfoodmachinery.com

 


more on Karl Schnell Melpa 1000 Mixer

Karl Schnell Melpa 1000 Mixer

COMING SOON TO HENDERSON FOOD MACHINERY!

more on Kolbe MWE52 Mixer Grinder

Kolbe MWE52 Mixer Grinder

Kolbe MWE52 Mixer Grinder

2007 Machine 

Ideal for use in small to medium meat processors

120 litre hopper capacity

52 size head

Will produce up to 1700 kg/h of product 

Plate diameter 130 mm

Kolbe MW52 comes with the 'autoreverse system' which helps prevent unmixed product being left in the worm. 

The system changes the direction of the mixing paddle in the machine and spins the worm backwards for approx 2 secs to force any product lying in the worm back into the chamber.

Please call Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on KT ALP Meat Press

KT ALP Meat Press

KT ALP MEAT PRESS

The KT ALP Meat Press tenderises and thins meat and poultry without weight loss

This is a very fast and efficient machine, capable of pressing up to 800 steaks per hour

The KT ALP Meat Press also has adjustable plates so you can get your desired thickness, ranging from 1-30mm. This is controlled by a wheel on top of the machine

For further information on the KT ALP Meat Press or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Lagarde Autoclave Retort 5 Basket

Lagarde Autoclave Retort 5 Basket

Lagarde  Autoclave Retort 5 Basket

5 Basket

Still In situ can be viewed fully working

Steam is automatically and directly injected into the retort (autoclave) chamber and is properly distributed; a fan agitating the steam and air with efficiency enables a uniform heat distribution in the entire retort (autoclave) chamber in order to guarantee good temperature accuracy during the holding time.

Cooling is achieved with recirculated water cooled by fresh water or via a Plate Heat Exchanger.

 Recirculated water comes from steam condensates to which is added an amount of pre-cooling water. The addition of cold water is automatically and gradually obtained in order to eliminate the “thermal shock” and control temperature for ramping down.

For further information call our sales team on 02890 994 202 or email sales@hendersonfoodmachinery.com

 

 


more on Loma IQ Full Block Metal Detector

Loma IQ Full Block Metal Detector

COMING SOON TO HENDERSON FOOD MACHINERY!

more on Mainca CR40 Stainless Steel Bowlcutter

Mainca CR40 Stainless Steel Bowlcutter

Mainca CR40 Bowlcutter

Stainless Bowl

40 Litre

Capacity of bowl in litres 40 which equates to around 25kg

Bowl Choppers cutters are suitable for all types of sausage meat poultry fish petfood and vegetable production and can be used to process a wide variety of fresh and frozen materials.

Built entirely of stainless steel, the Mainca Sausage Bowl Cutter IS manufactured to the highest standards to help processors achieve higher productivity and efficiency.

The Mainca Bowl Cutter is perfect for all applications which require mixing, particle reduction and emulsifying, it allows flexibility to quickly change recipes and offer the highest levels of productivity

Product structures from coarse chopping to the finest emulsions can be achieved, all with a uniform mix

Ideal for emulsifying and cutting up products within meat, fish, poultry, dairy, vegetables and petfood industry

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

 

 

more on Marel Target Batch Weigher TBL 3000

Marel Target Batch Weigher TBL 3000

Marel TBL 3000

Marel Target Batch Weigher TBL 3000

The DIMS are: L3150mm X W790mm X H1470mm

Target Batcher for Meat 

Accurate fixed weight batches

Reduced giveaway

Increase throughput 

Easy to install, easy to use

Up to 30 batches per minute 

The Marel TBL 3000 Target Batcher is the easy way to reduce giveaway, combining a pre-determined number of fresh or frozen products into a package of exact weight.

The Marel has a 7 high-accuracy individual scales and 14 holding bins the Target Batcher selects the best combination of products in the fraction of a second.

The Marcel TBL 3000 is ideal for 

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Meyn Filleting Machine

Meyn Filleting Machine

machine number: 709660

year of construction: 2000

dimensions: L3200 mm x W1600 mm x H2300 mm.

Meyn mobile elevating belt

machine number: 709487, year of construction: 2000, plastic belt, belt width: 400 mm, elevating height: 1880 mm.

total dimensions: L3700mm x W1000mm x H1900mm.

Meyn deboning belt

machine number: 709960, year of construction: 2000, 6 workstations, dimensions each workstation: 770 mm x 400 mm, approximately belt width: 300 mm, total dimensions: L5500mm x W1100mm x H1200 mm.

The Meyn fileting machine has a Scanvaegt weighing and grading line consisting of Scanvaegt infeed conveyor;

type: Infeed conveyor 712.25.75, serial number: BLD00592, 230v, 1Ph, 50Hz, 4.4A, year of construction: 2002, dimensions: 730 mm x 500 mm x 1100 mm, Scanvaegt checkweigher,

type: Scansizer 7146.28.20LR, serial number: BKZ01050, year of construction: 2002, belt width: 275 mm, 400V, 3Ph, 50Hz, 12A, dimensions: 850 mm x 1200 mm x 1300 mm and 

Scanvaegt grader,

Type: Separator 716.25.240.2X4CH, serial number: BLM00216, year of construction: 2002, 230V, 1Ph, 50Hz, 4.4A, belt width: 275 mm, 8 flippers, 2300 mm x 750 mm x 1300 mm, total dimensions: 2880 mm x 1200 mm x 1300 mm.

Complete filleting line for chicken.  

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com


more on Minipack Torre L Sealer with Shrink Tunnel

Minipack Torre L Sealer with Shrink Tunnel

Minipack Torre L Sealer with Shrink Tunnel 

 L Sealer 

Shrink Tunnel 

Minipack Torre Modular 50

Ideal for packing a variety of products within various industries 

Electrical power supply V 200/208/230/380 (3 Ph.) - 230 (1 Ph.)
MAX power installed kW 2.3
Hourly output p/h (pph) 0-900
Available dimensions of the sealing bars mm 540x400
MAX Reel Dimensions (diameter) mm 250
MAX Reel Strip Dimensions (width) mm 600
Work surface height mm 930
Machine weight (Net/Gross) kg 151/182
Machine dimensions with the sealing frame open mm 1565x750x h.1400
Machine dimensions with the sealing frame closed mm 1565x750x h.

For Further Informatuon Contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on MPE RT900 Rotary Tray Sealer

MPE RT900 Rotary Tray Sealer

MPE Rotary Tray Sealer 

RT900 Semi-Automatic Twin Station Rotary Machine

Presently set up with gas facility 

Suitable for use in ready meals. meat, fish, poultry vegetables and other industries 

D2 Tooling 

Approx Sizes 

External 157mm x 198mm 

Internal 137mm x 178mm

A semi – automatic heat sealing machine with a two station rotary table, capable of sealing a wide range of film or card lids to plastic, cardboard and foil containers. 

Electrical supply : 1 phase 240V 50Hz 16A

Air Consumption : 9 CFM

Production speed : 15 cycles per minute

Features

Quick tool change

Fully portable

Simple colour touch screen operator controls.

Food grade hygienic stainless steel construction & guarding

Accurate temperature and seal controls

Accurate tool alignment system provides a consistently accurate seal

For further information on Tray Sealers or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery. 

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com

more on Multivac R230 Thermoformer

Multivac R230 Thermoformer

MULTIVAC R230 THERMOFORMER

Stainless Steel Construction

8 - 10 cycles per minute

Flexible Film

Previously used for producing bacon packs

Pack size approximately: 260 x 260 x 90mm

Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product.

For further information on the Multivac R230 Thermoformer or any of our other machines, please contact our sales team at Henderson Food Machinery

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on Mushroom Slicer

Mushroom Slicer

Mushroom Slicer Inline System 

Conveyorised Slicer 

Hopper Fed 

5 Lane 

MultiBlade System

12mm Blade Settings 

High Throughput Machine

Vibratory Shaker at end of slicer to separate sliced mushrooms

Contact Henderson Food Machinery for further information on 02890 994 202 or email sales@hendersonfoodmachinery.com 


more on N&N  (Orbmix) MV300 Litre Tumbler

N&N (Orbmix) MV300 Litre Tumbler

Used N&N Orbmix MV300 Vacuum Tumbler

Manufactured by N&N Poland rebranded under other name 

Superb condition 

300 Litre Tumbler 

Cement mixer type tumbler with a Mikster PLC touch screen control panel and a built in vacuum pump.

Rotational drum

Ideal for mixing and tumbling various products with or without vacuum

Nadratowski Orbmix Vacuum Tumblers can be used in variety of applications: meat, poultry, pork, seafood or cereals

Fully programmable - speed, time and vacuum

Tumbler discharges the product straight into a tote bin.

we can also offer New N&N Tumblers, Twin Shaft Paddle Mixers, Mixer Grinders, Flakers 

For further information call Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on N&N  Portable Tote Bin Lifter

N&N Portable Tote Bin Lifter

N&N Portable Tote Bin Lifter 

Potable Tote Bin Lifter 

Suitable for 200 Litre Tote Bins 

Easy to move around factory 

3 Phase 

Tipping Height 1290mm 

Small and Compact Machine

Can be used for tipping a variety of products meat, fish, poultry, vegetables, petfood and other applications 

Contact Henderson Food Machinery for further information on 02890 994 202 or sales@hendersonfoodmachinery.com

 

more on N&N 180 Litre Twin Shaft Paddle Mixer

N&N 180 Litre Twin Shaft Paddle Mixer

N&N 180 Litre Twin Shaft Paddle Mixer 

180 Litre Litre  

2008 Machine 

N&N suitable to mix all types of food products within meat, fish, vegetables, cheese, canned food, sandwich, confectionery, pet food industry.

N&N litre twin shaft paddle mixer features a paddle shaft arrangement with one slightly higher than the other to give a more effective mix. 

This together with a gentle action and short mixing time of the product reduces particulate destruction maintaining the product structure, colour and its original quality.

For more information on this machine call our sales team on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

 

more on N&N 900 Litre Twin Shaft Paddle Mixer with Tote Bin Loader

N&N 900 Litre Twin Shaft Paddle Mixer with Tote Bin Loader

N&N 900 Litre Twin Shaft Paddle Mixer 

900 Litre Litre with Tote Bin Loader 

2006 Machine 

N&N suitable to mix all types of food products within meat, fish, vegetables, cheese, canned food, sandwich, confectionery, pet food industry.

N&N 900 litre twin shaft paddle mixer features a paddle shaft arrangement with one slightly higher than the other to give a more effective mix. 

This together with a gentle action and short mixing time of the product reduces particulate destruction maintaining the product structure, colour and its original quality.

N&N 900 is a fully pneumatic machine for ease of loading and discharge and it also has a tote bin lifter attached 

For more information on this machine call our sales team on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

 


more on Nieros Walk Through Sole and Boot Washer and Hand Hygiene Guard with Turnstile

Nieros Walk Through Sole and Boot Washer and Hand Hygiene Guard with Turnstile

NIEROS WALK THROUGH SOLE AND BOOT WASHER & HAND HYGIENE GUARD WITH TURNSTILE

BOOT WASHER

Model: DR/1000 V300

Nieros walk through sole and boot washer guarantee fast and efficient cleaning of footwear entering or exiting production areas. 

Nieros walk through washer is fitted with handrails at either side to prevent slipping, tripping or falling. One rail has an activation sensor and on the lower rail there is also an emergency stop button.

Industrial boot cleaners have height adjustable vertical brushes to clean both sides of each boot. 

Nieros walk through sole and boot washer is the most efficient combination of a footwear cleaning station and additional disinfection unit for cleaning and sanitising both the soles and sides of boots.

Superb condition

3 phase machine

Easy to change brushes, no tools required

Sanitisation basin with drip-off zone

HAND HYGIENE GUARD WITH TURNSTILE

Model: HDK SF

Nieros Hand Hygiene Guard is 100% efficient. You can not pass through the turnstile before placing both hands inside the machine where you are then provided with an ample dosage of soap. After the cleaning application is complete the turnstile will release and you can pass through.

Machine Dimensions: H1440 x W815 x L810mm

Floor Mounted

Cleaning Agent: Soap

Single Phase

For further information on the Nieros Walk Through Sole and Boot Washer and Hand Hygiene Guard or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Nilma Frymatic Continuous Electric Fryer

Nilma Frymatic Continuous Electric Fryer

Nilma Frymatic Continuous Electric Fryer

Frying Width 400mm, 3000mm and 2200mm in the oil

This Nilma Frymatic Inline Fryer allows perfect frying of breaded products, French fries, various potato products, vegetables, fish, chicken legs, sweets and all those products that need a crisp finishing.

Nilma Frymatic has an infeed conveyor and is also fitted with an exhaust pipe

72kw

For further information please contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on Nilma Mix-Matic 150 E Tilting Cooking Kettle

Nilma Mix-Matic 150 E Tilting Cooking Kettle

NILMA MIX-MATIC 150 E TILTING COOKING KETTLE

Automatic electric tilting pan for mixing, cooking and cooling

Nilma mix- matic is ideal for cooking soups, stews, rice dishes, sauces, jams, puddings and many more products

Product is mixed using a stainless steel mixing arm equipped with scrapers on the wall and bottom, these are easily removed for cleaning

Nilma mix-matic as a 125 litre pan that allows you to cook large quantities of your product evenly and unattended, saving time and labour

TECHNICAL FEATURES:

Entirely made of stainless steel

Insulated, hydraulically driven cooking pan

Lid mounted on balanced hinges

Adjustable feet

Automatic mixing device operated by a geared motor

Easily removable blending paddles

Easy to use control panel with adjustable cooking temperature, timer, pan tilting, temperature warning and much more

Safety valve for steam pressure 

Emergency stop button

MACHINE DIMENSIONS: H1200 x W1250 x L1200mm

Height with lid open: 1900mm

Diameter of pan: 580mm

Depth of pan: 580mm

For further information on the Nilma Mix-Matic 150 E or any of our other machies, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44(0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

more on PA Vision 400 Tray Sealer

PA Vision 400 Tray Sealer

PA Vision 400 Tray Sealer

PA Vision 400 Tray Sealer is a stainless steel continuous tray sealing machine

Various tooling available

Nicholas HV43 Trays

4 Trays sealed at one time 

Up to 80 trays sealed per minute

Tray outer dimensions. Approx 200 x 150mm

Tray inner dimensions. Approx 180 x 130mm

Easy to change tooling

Touch screen control panel allows pre-programming 

For further information on the PA Vision 400 Tray Sealer or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 


more on Palmia Mixer Grinder

Palmia Mixer Grinder

Palmia Mixer Grinder 

Spiral Mixer

Can be supplied with tote bin hoist at extra cost 

Ideal for Mixing and Mincing meat, fish, poultry, vegetable and petfood products

Machine has been refurbished

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on Pietroberto Single Line Midi Divider

Pietroberto Single Line Midi Divider

Pietroberto Single Line Midi Divider

Single Line

Midi Divider

Compact machine for use in artisan and industrial baking factories. Hopper with a synthetic belt and high loading capacity. Device for constantly feeding dough to the machine. Calibrating cylinders that roll out the strip of dough to be cut. Two production speeds and three cutting speeds. Practical adjustment of the breaking devices.

Stand alone machine single lane midi divider.

For further information please contact us at Henderson Food Machinery on

+44 (0)2890994202 or email  sales@hendersonfoodmachinery.com

more on PU Belt Conveyor

PU Belt Conveyor

PU Belt Conveyor 

Green Belt

Painted Frame 

200mm wide 

2500mm length 

Machine dimensions:

H900mm x L2500mm x W400mm

For further information please call HFM on 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Raytheon Batch Microwave Tempering Unit

Raytheon Batch Microwave Tempering Unit

Raytheon Batch Microwave Tempering Unit

Batch microwave systems are better suited to tempering applications with hourly throughput around 2000 lbs per hour

There is no minimum loading requirement 

Previously used for tempering meat and poultry products

For further information on the Raytheon Batch Microwave Tempering Unit or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com


more on Redpack P325 Flowwrapper

Redpack P325 Flowwrapper

Redpack P325 Stainless Steel shrinkwrap flow wrapping machine which is renowned for efficiency and reliability and is the ideal machine for shrink wrapping product in trays.

The P325 industry leading Horizontal flow wrapping machine that has been designed for versatility and easy configuration to suit all Flow Wrapping applications.

Ideal for wrapping a variety of products in trays within the bakery, meat, ready meals, poultry, vegetables, contract packers and other applications 

2009 machine 

Can wrap tray and trayless products width 130mm & depth 90mm

No Gas on this machine 

For further information call 02890 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Rewi Vacuum Tumbler 1300 Litres

Rewi Vacuum Tumbler 1300 Litres

Rewi Vacuum Tumbler 

1300 Litre 

Built in Vacuum Pump

3 Phase Motor 

Ideal for a variety of applications, Massaging of cooked cured products,Salt impregnation Braising and in-depth salting of dry cured products, Dry salting, Seasoning and marinating, Game and goulash, Mixing of salads, dressings and sauces, Seasoning and processing of fish and seafood products   

Horizontal  rotating drum with 3-point support on solid frame with front end loading  and discharge and automatically discharges when shifting from forwards to reverse 

Please call or email for further information on 02890 994 202 or sales@hendersonfoodmachinery.com

more on Risco Vacuum Filler

Risco Vacuum Filler

Risco Vacuum Filler

This Risco continuous all-round vacuum filler is a compact and extremely versatile machine, ideally suited to process various products through vacuum 

This machine is suitable for small to medium producers  producing top quality products. 

The versatility of this filler permits easy change over to different kinds of products and programs during the same working day. 

The new multifunction control computer with icons allows a large selection of the filling parameters and a rapid programming and recall during the production time. 

Main Features

Maximum production flexibility

Gentle and accurate filling process

High production performance

Easy control-system programming

Production Throughputs per hour: 2.800 Kg per hour

Portioning speed: 400 pieces per min

For further information on the Risco Vacuum Filler or any of our other machinery, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Robot Coupe R30 Vertical Cutter Mixer

Robot Coupe R30 Vertical Cutter Mixer

Robot Coupe R30 Vertical Cutter Mixer

Robot Coupe R30 can be fitted with various blades suitable for chopping, shredding and mixing

Robot Coupe R30 is a 3 legged stainless steel system with built in retractable wheels. Wheels make it easy to transport and to clean around but also when retracted the legs provide total stability

Robot Coupe R30 is fitted with a transparent poly-carbonate, watertight lid. This enables the user to monitor processing

The stainless steel control panel is fitted with flush buttons, pulse control and a 0-15 minute timer 

Robot Coupe R30 is also fitted with 28 litre, 2 handle bowl with a locking lever. This enables the bowl to tilt and lock at every angle, the bowl is also removable

3 phase machine

2 speeds: 1500 & 3000 rpm

Machine Dimensions: H1250 x W720 x D600mm

For further information on the Robot Coupe R30 Vertical Cutter Mixer or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 


more on Ross Tray Sealer

Ross Tray Sealer

Ross tray sealer 

Ross Tray Sealers produce modified atmosphere packages and vacuum skin packages from preformed trays of almost any size or shape. 

The Ross Tray Sealer will package fresh, refrigerated, retort or frozen food products at a full range of output rates.

The Ross modified atmosphere package and vacuum skin package systems produce attractive, leak-proof, tamper-evident packages with greater seal integrity and extended shelf life. 

The Ross tray sealer is perfect for all types of sausage, meat, poultry, seafood, prepared food and cheese packaging.

The Ross Inpack Junior A20 is an automatic tray sealer specially designed for modified atmosphere packaging and Vacuum skin packages packaging. 

The A20 is ruggedly constructed for serious production. It comes equipped with a programmable controller and digital function timers. Designed for versatility, changeovers can be completed in just 10 minutes. 

The Ross tray sealer features integrated knife and seal head assemblies that are independently controlled. The machine is USDA approved, CE certified, and comes equipped for both high and low 02 applications. 

The production rate for the A20 is 10 cycles per minute. It can produce packages in up to 4 lanes. The machine is perfect for smaller and medium sized operations. It is also well-suited for larger companies who are conducting market tests for new products.

H1820mm X L3540mm X W1300mm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Ross Uniform Meat Press

Ross Uniform Meat Press

Ross uniform meat press 

The Ross uniform meat press is a Unique forming system assures accurate moulding and consistent performance. 

It has Adjustable pressure and dwell controls ensure that exact product shape parameters are obtained. 

The Press Mould can be easily removeable and installed for new product shapes. 

Internal hydraulics system already built in.

MACHINE DIMENSIONS = H1656mm X W820mm X L2250mm

Working measure = 221cm x 71cm 127cm

MACHINE DIMENSIONS

VOLTAGE REQUIREMENTS 200-575V • 50/60Hz • 30-12A

DWELL RANGE 3 to 10 Seconds

AVERAGE CYCLES / MINUTE 6

PRESSURE Adjustable to 1,500 psi

PRODUCT TEMPERATURE 25°F to 29°F

-4°C to -2°C 

MAXIMUM MOLD CAVITY SIZE

MOULD SIZE DEPENDANT UPON WIDTH AND HEIGHT OF PRODUCT 22" L x 6.5" W x 9" H

55.8cm x 16.5cm x 22.8cm 32" L x 5" W x 10" H

81.2cm x 12.7cm x 25.4cm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Rovema BVI 260 Vertical Form Fill Seal Machine

Rovema BVI 260 Vertical Form Fill Seal Machine

Rovema VFFS Bagger BVI 260

Vertical Form Fill Seal Machine

Rovema is a  leading supplier of  VFFS Machines.

260mm Sealing Jaw

Markem Smart Date 2 Printer

Easy to use touch screen panel 

2 Sealing Tubes 120mm x 170mm Approx

Previously used for packing frozen seafood products. This machine can be used for a variety of fragile products including granular products, powders, food and non-food products. 

Technical Data 

Output  Up to 120 bags per min.

Suitable for the following bag styles: Pillow bag, pillow chain bag, gusseted bag, stand-up pouch at an extra cost

For further information on the Rovema VFFS Bagger, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

 

more on Ruhle MR 900 Dicer

Ruhle MR 900 Dicer

The Ruhle MR 900 Dicer produces cubes, strips or slices from fresh, cooked or tempered meat & poultry. It features a product chute of 80mm by 80mm with variable sized product with by easily changing the harps or blade configuration

The machine would be ideal for butchers/meat processing companies.

L1610mm X W570mm XH1040mm 

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com


more on Safeline Signature Full Block Metal Detector

Safeline Signature Full Block Metal Detector

COMING SOON TO HENDERSON FOOD MACHINERY!

Safe line Signature full block metal detector.

Metal detectors are used in the food industry to guarantee the safety of food products from metal contaminants.

They are mostly widely used throughout the industry to detect any trace elements of metal that may have got into the food during the production process. 

Pneumatic air blast reject system lovely compact unit

65mm wide modular chain conveyor belt  

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

 

more on Saimo Twin Head Linear Weigher

Saimo Twin Head Linear Weigher

belt dimensions:L970mm x W240mm

Full dimension:W1100mm x L1600mm x H2030mm

more on SAP Twin Shaft Tilting Paddle Mixer

SAP Twin Shaft Tilting Paddle Mixer

SAP Twin Shaft Tilting Paddle Mixer 

100 Kilo Mixer 

Tilting Machine 

Will discharge into tote bin

2016 Machine 

Previously used for mixing meat products however suitable to mix all types of food products within meat, fish, vegetables, cheese, canned food, sandwich, confectionery, pet food industry.

For Further Information Contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on Saxon SB1000 Bag Sealer with Conveyor

Saxon SB1000 Bag Sealer with Conveyor

COMING SOON TO HENDERSON FOOD MACHINERY!

Saxon SB1000 Bag Sealer with Conveyor 

The Saxon SB 1000 Bag Sealer, is a continuous bag sealer capable of closing a variety of plastic bags and pouches. With its durable design and stainless steel finish, the SB 1000 is compatible with the hygienic requirements of the food, medical, and chemical sectors.  The high-efficiency band-sealing module and enhanced cooling capabilities produce reliable, esthetic seals on bags or pouches made from polyethylene, polylaminates, co-extrusions, and shrink films.

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com


more on Screw Augers

Screw Augers

Screw Augers

Length 5 metres 

Width 590mm 

3 phase 

The screw conveyor is designed to transport food products = from one point to another in a safe and efficient manner.

The screw augers are stainless steel

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Skerman 500 Litre Steam Cooking Vessel

Skerman 500 Litre Steam Cooking Vessel

Skerman 500 Litre Steam Cooking Vessel 

Scrape Surface 

Capacity 500 Litre 

YOM 1975 

Bottom Discharge 

Stainless steel 

Ideal for various products such as ready meals, sauces, gravys etc 

For further information please contact us on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on Soco Systems box taper

Soco Systems box taper

H1800mm xW900mm x L1670mm

more on Spako 3 Trolley Smoke House.

Spako 3 Trolley Smoke House.

Spako 3 Trolley Smoke House.

The Spako is an electric machine 

The DIMS of the machine are:H2630 X W1950 X L3430mm

It comes with 5 trolleys 

H1020 X W1950 XL3430mm

This machine is ideal for cooking Fish, beef, gammons etc

For further information call Henderson food machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com  

 


more on Stainless Steel Tote Bin with Pouring Lip

Stainless Steel Tote Bin with Pouring Lip

Stainless steel Tote Bin with pouring lip 200 litre

200 litre Euro bin

Push handle

Ideal for transporting products around the factory, also for mixing and stirring products

We can also supply 300 litre bins and bins with holes

Best prices around

Please call or email for further information

Henderson Food Machinery 02890 994 202 or sales@hendersonfoodmachinery.com

 

more on Syspal Sanitising Tunnel with Roller Conveyors

Syspal Sanitising Tunnel with Roller Conveyors

Syspal Sanitising Tunnel

2017 Machine Unused

Manually loaded sanitising conveyor  

304 grade stainless steel construction  

With a flush grid 596mm width food grade plastic modular belting  

Height Top of Belt 775mm +/- 50mm Box section underframe support structure complete with tubular cross braces  

Robust design with good access for routine cleaning and maintenance procedures 

The sanitising tunnel has a lift off stainless steel tunnel hood for ease of access / maintenance complete with curtains to each end of tunnel. 

Hood terminates at wall of low care environment to provide hygiene barrier  

All legs complete with adjustable feet and bolt down facility.  

It has an End Drive motor/gearbox IP65 rated complete with stainless steel motor cover  

Control panel IP67 rated, mounted on side complete with all necessary controls  

Stop/reset, stop illuminated button, Tank Low level LED, door interlocked isolator, emergency stop, belt speed control potentiometer & out feed sensor Off /On switch. 24v Control Circuits  

Electrical Supply: 415V-3ph-50Hz 16amp +Neutral & Earth   Nominal Speed 10mtrs/min @ 50Hz Variable; 20hz -70Hz  

Infeed sensor starts spray bar and conveyor when product passes.  

Out feed sensor stop unit with timer delay  

Side guides through tunnel hood 360-degree loop spray nozzle-set  

Removable tank  

Maximum product clearance through nozzle-set - 575mm wide x 480mm high maximum 

Stainless steel tub Excess flow cascades to recirculation tank via mesh filter on top of tank   

Tank fitted with high- and low-level sensors and tank drain valve 

Dosatron, chemical dosing unit with adjustable dose rate of 0.2% - 2.0% 

Auto top up via mains connection to solenoid valve, non-return valve & Dosatron.  

Filter element, 50 micron, between pump and spray bar to protect nozzles  

Control valve fitted to regulate flow to spray nozzles Infeed and out feed gravity tracks 

Compact design   

Hex head with Aerotight fixings used throughout fully assembled and tested prior to despatch  

Complete with all necessary CE documentation

The DIMS are:H1600mm X L2770mm X W1400mm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Syspal Tote Bin Tipper

Syspal Tote Bin Tipper

Syspal Tote Bin Tipper

Model: 600 HT2 1059

YOM: 2016

Suitable for lifting 200L Tote Bins

Machine Dimensions: H1580 x W1380 x L1630mm

Max Tipping Height: 1350mm  

125° Tipping Angle

Safe Working Load: 350kg

3 Phase

Small compact machine, easy to move 

Can be used in various industries for multiple products, food and non-food

They reduce the risk of injury, are weatherproof and can be used inside and outside your industry

For further information on the Syspal Tote Bin Tipper or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 

 

more on Systemate Deboner

Systemate Deboner

Systemate Deboner

type: FAO33510

Serial number: SRTDO395108

Year of construction: 1995

Weight: 470kg 

Dimensions: 1600 mm x 1300 mm x 1800 mm

The Systemate Deboner machine is suitable for chicken breasts without backbone, with or without skin.

It Is ideal for meats such as Poultry, beef and lamb and can be used to remove the bones from fillets, drumstick, breast, backbone, thighs, ribs etc.

The Systemate Deboner Mechanically debones anatomical thighs at a maximum capacity of 2,400 products per hour. 

The thighs are supplied to the stand-alone machine by using e.g. a belt conveyor. 

Good condition.

length = 65", width = 48", height = 74"

For further information on the Treif Puma or other Treif machinery contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com  


more on Treif 1921 Slicer

Treif 1921 Slicer

Treif 1921 Slicer

Chamber dimensions 250x220mm

Machine dimensions 1950x900x1500mm 

Cutting with a Treif slicer means it can slice up to 400 cuts per minute with absolute precision, no matter if it is chops, steaks, cutlets, pork belly, fish, meatloaf or cheese. 

Suitable for fresh, chilled or frozen down to - 4 degrees. 

This machine is ideal for Fish processing, meat processing/butchers, and cheese processors. 

The Treif slicer blade is directly coupled to the drive motor, which cuts using the motors power at nearly 100 %.

400 Slices per minute 

Outfeed Conveyor

For further information on the Treif Puma or other Treif machinery contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com  

more on Treif Felix 100 CE Dicer

Treif Felix 100 CE Dicer

Treif Felix 100-CE Dicer 

Model 100-CE

2017 Machine

Three Phase Machine

Dicing with Treif

Top cutting quality thanks to sensor-based cutting technology

Small cleaning effort thanks to the hygienic design that is thought out to every detail for optimum cutting conditions, hygiene cylinder

Ideal cutting conditions thanks to product specific accessories, e.g. gentle cut grid set for tender products like fresh meat

Small Compact Dicer 

5mm 10mm 15mm 20mm Dicing Set

Ideal for dicing various products meat, fish, poultry,cheese vegetables and other applications 

The spacious 96 mm / 3 4/5" cutting chamber enables the product to be loaded comfortably without the inconvenience of pre-cutting. 

The unique dual-stroke, two-part grid system facilitates precise dicing and stripe slicing of the most delicate products by providing twice the normal cutting length at reduced cutting pressure.

The drive is synched automatically after the machine is turned on.

The separating slide operates in a curving motion. This enables user-friendly, one-hand operation. 

Shearing cut: The minimum distance between the grid and the cutting knife ensures excellent slicing results and prevents the formation of so-called "cube strings".

Wide range of application options

Inconvenient pre-cutting of the products is a thing of the past thanks to the spacious cutting chamber

Optimum product compression as a result of the automatic pre compression system.

The compact and space-saving design is perfectly suited for the needs of small businesses.

Gentle cut of delicate products as a result of the dual-stroke technology.

It provides dual cutting lengths at a reduced cutting pressure.

The „click & go“ quick change grid-set system ensures that the grids can be exchanged in a matter of seconds if they need to be replaced or cleaned.

Throughputs 800K/G per hour product dependent. 

Operating voltage ; 415v

Control voltage ; 230v

Rated current; 3A

Supply line current ; 10A

Dimensions;

L;760

W;990

H;1050

Contact Henderson Food Machinery for further information on 02890 994 202 or sales@hendersonfoodmachinery.com

more on Treif Puma 700 E/EB (HS) Slicer and Portion Cutter

Treif Puma 700 E/EB (HS) Slicer and Portion Cutter

Treif Puma 700 E/EB (HS) Slicer and Portion Cutter

Treif Puma 700 E/EB (HS) Slicer and Portion Cutter

Motorised Outfeed Conveyor

2015 Machine

PLC Control

A powerful performance machine - for bone-in and boneless products

Cutting with the Treif Puma means a performance of 400 cuts per minute 

No matter if it chops, steaks, cutlets, pork belly or meatloaf, whether it is fresh, chilled or frozen down to - 4 degrees. 

As the blade is directly coupled to the drive motor, its cuts using the motor’s power at nearly 100 %

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

 

more on Treif Puma CE Chop Cutter

Treif Puma CE Chop Cutter

Treif Puma CE ChopCutter  

Treif Puma Cutter and Slicer

Cutting with a Treif Puma means it can slice up to 400 cuts per minute with absolute precision, no matter if it is chops, steaks, cutlets, pork belly, fish, meatloaf or cheese. 

Suitable for fresh, chilled or frozen down to - 4 degrees. 

The Treif Puma blade is directly coupled to the drive motor, which cuts using the motors power at nearly 100 %.

400 Slices per minute 

Outfeed Conveyor

For further information on the Treif Puma or other Treif machinery, please do not hesitate to contact our sales team at Henderson Food Machinery.

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com   

 


more on Turbovac STE 1000 Swing lid Vacuum Packer.

Turbovac STE 1000 Swing lid Vacuum Packer.

Turbovac STE 1000 Swing lid Vacuum Packer. 

2011 model machine is in tremendous condition, plugged in and working well.

Ready to dispatch immediately! 

The Turbovac STE1000 swing lid vac packer is a Stainless-steel machine with  

4 x 920mm sealing bars

870mm usable depth (gap between the bars)

220mm chamber height 

With a Busch 300 vacuum pump

Has 25 – 40 second cycle time depending on product requirements and atmosphere

Double seal sealing

3 phase 32-amp electricity

H1400mm X W1230mm X L2100mm

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com

more on Various New and Used 200 Litre Tote Bins

Various New and Used 200 Litre Tote Bins

Various New and Used Tote Bins
 
Stainless Steel 200 Litre Tote Bins
 
Plastic 200 Litre Tote Bins 
 
Tote Bins with holes and chutes 
 
Tote Bins Lids 
 
Push and Pull handles
 
Yellow Tote Bins
 
Stainless 200 Litre Tote Bins Weight: 40 kg 
 
For further information please do not hesitate to contact our sales team at Henderson Food Machinery
 
Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 
 

more on Vemag ROBBY 2 Vacuum Filler with Linker

Vemag ROBBY 2 Vacuum Filler with Linker

Vemag ROBBY 2 Vacuum Filler with Linker

Seperate Tote Bin Hoist

Linker System

In full working order

3000kg per hour

Please see leaflet in pictures

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on VFFS Bagger

VFFS Bagger

COMING SOON TO HENDERSON FOOD MACHINERY!


more on Walk Through Boot And Sole Washer

Walk Through Boot And Sole Washer

Boot and Sole Washer walk through sole and boot washer guarantee fast and efficient cleaning of footwear entering or exiting production areas. 

Machine is fitted with handrails at either side to prevent slipping, tripping or falling. 

Industrial boot cleaners have height adjustable vertical brushes to clean both sides of each boot. 

Walk  through sole and boot washer are the most efficient combination of a footwear cleaning station and additional disinfection unit for cleaning and sanitising both the soles and sides of boots.

More information to follow

Arriving Next Week

For more information Please contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on WE Unifiller Depositor

WE Unifiller Depositor

Wynyard Engineering Unifiller Depositor

Previously used for depositing vegetables into pots can be used for various products filling into Trays or Pots

The Unifill machine is designed to supply solid food products into various containers. The machine achieves this through a vibrating main hopper and product chute, which supplies the product to the electrically controlled, pneumatically operated dispenser.

The quality of food product dispensed to the product containers is controlled by telescopic volume cups and can be manually adjusted to suit the type of food product and its container.

H2000mm X L1700mm X W1100mm

For further information please do not hesitate to call Henderson Food Machinery on 02890 994 202 or email our sales team sales@hendersonfoodmachinery.com

 

more on Wedge Maestro WM5

Wedge Maestro WM5

The Wedge Maestro WM5 

Potato Wedging Machine 

Carousel System

Now Sold

For further information contact Henderson Food Machinery on 02890 994 202 or email sales@hendersonfoodmachinery.com 

more on WOLFKING SFG 850-200 Mixer Grinder

WOLFKING SFG 850-200 Mixer Grinder

Wolfking Mixer Grinder

Model: SFG 850-200 

YOM 1996

Self Feeding Grinder 

850 Litre Capacity

200mm Grinding Head 

Ideal for mixing meat, fish, poultry, vegetables, petfood and then mincing through a 200mm grinding head 

For further information on the Wolfking Mixer Grinder or any of our other machines, please do not hesitate to contact our sales team at Henderson Food Machinery

Call +44 (0)28 90 994 202 or email sales@hendersonfoodmachinery.com 


Copyright ©2018 David Henderson Food Machinery
CLOSE

HFM Ratings

Henderson Food Machinery offer a rating on all our used machinery you can see the star rating on every used machine we have for sale.

We believe as a growing company and our realisation of customer expectations you need to create a star rating system this gives peace of mind so when buying machinery you feel comfortable, if you are not happy with your purchase we will refund the full purchase price.

Our policy for the 5 star assessment of the used equipment we have for sale, will be assessed by an independent engineer, our philosophy for providing this service is we understand the pressure all our customers are under on a daily basis and need to have peace of mind when buying used machinery without having manufacturing and processing problems.

You can contact our team at anytime and we will give you a true written assessment on your machinery enquiry

OUR POLICY IS WE CARE ABOUT PRESENT AND FUTURE CUSTOMERS

Superb Plug and Play Machine

Very Good Condition

Used Machine Will Need Work Going Forward

Old Machine Needs Work But Can be Fixed

Ideal For Spare Parts